iSUP Glue (1 oz)

6 review(s)
Retail: $3.99 Price: $2.95
You save You Save: $1.04 (26.1%)

Availability: Out of Stock notify me
Glue for iSUP

iSUP Glue (1 oz)

6 review(s)

SUP Accessories - Glue

1 oz. tube of glue for Tower inflatable stand up paddle boards. This glue is used to attach our d-rings to an inflatable paddle board. It can also be used to make a repair if you have a hole in your inflatable SUP. 

Frequently Bought with


SUP Accessories

This is a PVC glue used for attaching d-rings or other sup accessories to the board. Comes with one tube of 1 oz glue.

D-Ring attachment for Tower inflatable stand up paddle boards. Simply prepare the surface, then use the included glue to attach.

Installation Instructions (Paddle Board can be inflated or deflated. Typically easier when inflates to 10+ PSI):

  1. Prep the area by cleaning surface with rubbing alcohol.
  2. Apply the provided glue to the outer perimeter of the d-ring, about 1/5" from the outer edge (in just enough so the glue does not ooze out the side).
  3. Put the d-ring in the desired location and apply continuous pressure (with a book or a heavy object) overnight.
  4. Wait 24 hours before use

The glue can also be used to apply a repair patch to your Tower paddle board. It is done in the exact same way that the D-ring is. 

At Tower, we have a plethora of SUP accessories that will enhance your paddle boarding experience. If you need a back pack to transport your inflatable SUP, we have an iSUP backpack that will allow you to take your paddle board anywhere. Wear it like a normal backpack and fit all of your paddle boarding gear in it to make an easy SUP adventure even better. Our waterproof dry bag back pack will help keep all of your valuables dry. Pack you phone, camera, and an extra pair of clothes and know that everything will stay dry during your paddle board journey. Our electric paddle board pump is another amazing SUP accessory that will make your paddle boarding experience so much easier. With the electric pump, no longer do you have to expend energy pumping up your board before you even start paddling. All you have to do is plug one end into the cigarette lighter in your car and the other end into the paddle board and push start. The electric pump will do the rest. It will even shut off automatically when it is at the correct psi. 

6 review(s)

Overall Customer Rating of 6 Reviews:

Patching a hole.

Review by: from 56072 on 9/3/2019
This worked! I had a lagged cut on the side of my board and I followed the instructions for repair and it held! Very impressive!!


Review by: from on 10/6/2017
I only tried a tower board while out on the boat with some friends. I liked it and went home to conduct some research. I was impressed with the co history and philosophy. I was happy to hear the second gen 10' board was not thicker. I immediately purchased one and the tower power air pump. Everything arrived quick and I have been enjoying it since. I tell everyone I can about the Tower experience. I fish from my board also and it's awesome being able to carry it to the water from my truck without it being heavy or awkward. Just an awesome product and company. Hope to be a customer again soon for a second one. Thanks

9'10 Adventurer iSUP

Review by: from on 6/28/2017
The board's excellent manufacturing quality is obvious in spite of a little problem mine came with. This was taken care of quickly and properly by Tower's customer service, so no biggie.

Lots of flotation with a good balance between tracking and maneuverability. It takes me about 6 minutes to set up, and about 4 to put away.

All in all, a great buy.



Review by: from on 3/30/2017
Not sure about the glue. I haven't had to use it yet. It's for just in case.

good stuff

Review by: from on 8/10/2016
glue as expected. only used for small spot so far


Review by: from on 7/20/2016
Good quality and stores well in the repair kit.