How do I patch my inflatable SUP?

There is an included patch kit with our inflatable SUP boards. There are two round patches that you can glue onto the board. Note that the glue is not included in the kit (it creates a product shipping class of hazmat materials, so we leave the glue out), but you can find it readily available in a hardware store. You will need to get "Vinyl Repair Glue".

The first things you'll need to do is clean the patch and the area of the board with the puncture with acetone very thoroughly. Repeat this cleaning of both pieces that will join three times, waiting 5 minutes between cleanings. Then you're ready to apply the glue, and you'll be applying 3 layers of glue. Apply a thin layer to both the patch and the to be patched area and spread it around evenly with a brush. Wait 5 minutes and repeat, then wait another 5 minutes and repeat again. After the 3rd application of glue to both surfaces, wait 5 minutes and then press the patch against the to be patched area evenly and use a spoon to apply pressure throughout the patch working from the center towards the edge and moving around the patch like a pie. Wipe off any excess glue with acetone. Let the patch job fully set and dry for 24 hours before you attempt to inflate the board.

Watch the video below for a quick overview.


Inflatable Board FAQs

How durable is an iSUP?
Can rocks damage an inflatable SUP?
Are inflatable SUPs good for yoga?
Is it single chamber or are there multiple air sections?
Does it come with a paddle?
Is there a d-ring on the back for a leash?
Does it come with a leash?
Is there an option to buy a shorter center fin?
Can you attach a bungee to the board to store items during transport?
Can you attach a GoPro mount?
Can you add a seat to the board?
How do I inflate my SUP?
How long does the iSUP take to inflate?
What are the recommended and max PSI for the board?
What kind of pump options are there?
What kind of valve is on the board?
Can I use an electric pump with this board?
How do I install the pump gauge?
My gauge won't register, is it broken?
How do I secure the pump nozzle? Do I have the wrong one?
How long can I keep my board inflated?
What is the best way to deflate and roll up the board?
What PSI do I inflate my board to?
How do I install the center fin?
Does the board come with a warranty?