iSUP D-ring Paddle Board Accessory

42 review(s)
Retail: $7.95 Price: $3.95
You save You Save: $4.00 (50.3%)

Availability: In Stock
Usually ships In 1-2 Business Days
D-Ring Attachment + Glue for iSUP
  • D-Ring Attachment + Glue for iSUP
  • D-Ring Attachment
  • iSUP D-Ring Attachment
  • D-Ring Attachment for Inflatable SUPs
  • D-Ring Attachment and Rope
  • D-Ring Attachment for Inflatable Stand Up Paddle Boards
  • iSUP d-ring attachment bottom

iSUP D-ring Paddle Board Accessory

42 review(s)

D-Ring attachment for Tower inflatable stand up paddle boards.

This price includes ONE d-ring, and NO GLUE. Any PVC adhesive glue found at a local hardware store will work. 

Diameter: 3 1/2"

Frequently Bought with

Price: $59.95
Price: $2.95


Paddle board accessories

Looking for fun new ways to customize your inflatable sup with accessories? Look no further than our d-ring attachment. With a d-ring added on, you can drag your paddle board behind your boat while out on the sea. Easily tie together multiple boards. Anchor your board to a dock, or attach a sandbag to a d ring located on the bottom of board to anchor in the water while not in use. Tow a separate paddleboard behind you with all your fishing and camping gear. The possibilities are endless.

D-rings can be attached to any spot on our inflatable paddle boards. Since our isup's outer layer is made completely out of PVC material, any PVC adhesive glue will help adhere the ring anywhere on the board, even on the boards bottom side.

How to add a bungee net to your inflatable paddle board

Our older model boards such as the Adventurer 9'10, Kawasaki 10'4, iRace, and the Xplorer all do not come with a bungee net on board, but do not worry, adding one yourself is very easy! First you will need 4 d-rings. We then recommend measuring out a square (a bit more like a trapezoid actually) and marking the spots where you want your bungee cord. We recommend putting two as wide as possible, while still remaining a flat surface, right above the eva foam deck pad, and another two 7 inches further up the board, again making sure its on the flatter surface of the board. Gluing the d-rings on this flatter surface will be easier than gluing them on the side of the board where it starts to curl.

We unfortunately do not sell bungee straps, so you will have to buy supply your own. They can easily be found at local DIY and home improvement stores for very cheap. You will need at least 3 feet of bungee to make the netting. Take the opposite ends and feed one through either side of the d rings located closer to the foam deck pad. Then feed the bungee diagonally through the further d-rings, and connect the two in the middle of the top d rings by tying a firm knot. Make sure your bungee is firm, but stretchy enough to fit any gear within. Cut off any extra bungee around the tied knot if there is excess.

D-ring installation instructions

(Typically easier when board is inflated to 10+ PSI):

1. Prep the area by cleaning the surface with rubbing alcohol.2. Apply a PVC adhesive glue to the outer perimeter of the d-ring, about 1/5" from the outer edge (so the glue does not ooze out the side).
3. Put the d-ring in the desired location and apply continuous pressure, a spoon works well. For best results use a book or a heavy object and leave it applying pressure to the d ring overnight. 4. Wait 24 hours before use.

42 review(s)

Overall Customer Rating of 42 Reviews:

Put a ring on it

Review by: from Northern Wisconsin on 5/21/2020
Look its a functional d-ring like ever other d-ring I've encountered...except ones on saddles those are way different. It does a nice job. I ordered 4 and they came with 3 tubes of glue which was nice I thought I had to go buy my own. The one improvement, which I would pay extra for, is have an option for ones that sandwich the back with another layer of the vinyl so we work with 2 flat surfaces. That would make them easier to install on flat surfaces, where as the design works great for curved surfaces. Anyways, great price, very well made d-rings.

iSUP D-rings

Review by: from San Francisco Bay Area on 3/6/2020
These are very nice, well constructed and super handy. After applying on my board they look very clean and are strong. I could lift the whole board, about 22lbs. by one ring. I do have a couple of caveats however. These are very stiff and do not glue well to curved surfaces as its difficult to keep all edges down on board. The other is the adhesive dries very quickly. I found that waiting two minutes the glue had already dried and was not tacky at all, and in less than a minute it was ready to be applied. Just something to be aware of.

Need new way to secure the fin on ISUP

Review by: from Flagstaff, AZ on 9/21/2018
The D-ring itself is great but the reason I bought it is not. We have to come up with a new system for when the iSUP comes unattached from the board and we lose it. We are going to somehow try to attach the D-ring near the fin and somehow clip the fin into the D-ring so when it becomes unattached from board, we don't lose it and have to buy another one. We bought the fin screws and they work but hard to get threaded, require tools, and take too much time. We have spent too much money on new fins, fin screws and D-rings. I hope we this is going to be the answer to losing fins.

D rings

Review by: from CO on 9/1/2018
Great rings. Terrible glue. First glue tubes arrived all dried out. Requested a replacement than came quickly, but not enough to complete job well. Awesome customer service, but sub par product was surprising for otherwise great company

D- ring

Review by: from on 10/12/2017
Great attachment for SUP to anchor to shore.

D rings work great

Review by: from on 9/19/2017
I bought 8 rings (4 for each of my tower inflatable SUPS) to hold my waterproof cooler. I followed the instructions and didn't use them til 24 hrs after application and the are sturdy and hold my cooler without worry. At the local marine shop, very similar d rings were 10 times the price. I got a great deal and as usual, am very happy with my tower product

Good quality product

Review by: from on 9/19/2017
These were a great enhancement to my SUP and the online video was very helpful for installing them.


Review by: from on 8/14/2017
I purchased D-ring for my I-SUP. based on my conversation with sales rep. I was expecting to get two sets of 4 rings but when I open the package it was only 2 rings and the dry glue were everywhere in the box.
I called and explained the situation, the person was too nice and she said they will ship two new d-ring sets without charge and will make sure to put the glues into bobble wrap.

Overall happy and had a good experience so far :)


It works

Review by: from on 8/3/2017
The D ring works and was easy to install.

Mixed review

Review by: from on 8/2/2017
Ordered 4 D-Rings and the glue to attach to my iRace iSUP. When the package arrived the glue tube had been punctured during shipping and had leaked out into the plastic bag that it was in along with the D Rings. # of the D Rings were clean but the 4th had glue all over it. Took some time to try to get it cleaned off and usable. When gluing the Rings on the board it was a bit more difficult than I had hoped in getting them to seal all the way around as the glue takes a while to set up. Also had no extra glue after the leaky tube. Hopefully the D- Rings hold. A second tube of glue would be good for 4 or more D Rings.

Tower Products

Review by: from on 7/21/2017
All of my orders are quick and concise. The customer service is excellent- and Tower paddle boards are the best built boards for the money on the market today.


Review by: from on 7/21/2017
Easy to install. Clean and very strong install. I installed 8 of these d-rings on my 14' Xplode. Dependign on what your use is, it's almost like you can't have too many d-rings.

Great company

Review by: from on 7/21/2017
I can only say good things about Tower their customer service is great I've ordered a lot of stuff from them and even had a warranty problem that they correct with out a problem. Great company and I will continue to do business with them.

Required for deck bungee set-up on iRace

Review by: from on 7/14/2017
Picked up 10 to put 6 on nose and 4 on tail. My iRace is going to be used as more of a recreational board inshore on the Gulf of Mexico.

great product

Review by: from on 6/14/2017
perfect to attach bungee cord onto the top of my inflatable SUP. I wish they came in grey or black but they will work just fine.

D-Rings & Glue

Review by: from on 5/17/2017
I ordered 6 D-rings for each of my Adventurer iSUP's. I glued them on and strung elastic cord. They are easy to install and awesome! Thank you!! Now I have a cargo net on each board.

Easy Installation

Review by: from on 4/8/2017
Follow the video on the site and you'll be fine. Easy install, my only suggestion would be to do one ring at a time (glue, place, pressure,tape). I did all four at the same time and realized it was a bit difficult to put solid pressure on each D Ring to help reduce air bubbles.

Works like a charm.

Review by: from on 3/24/2017
Works. Making my own bungee system on my board.


Review by: from on 3/22/2017
as described...

Good Product

Review by: from on 3/22/2017
I am happy with the product however,it did not come with any directions.
Had to go online to get application directions.